Acrylic Diffuser, UGR Diffuser Manufacturer in China

PS Diffuser sheet with Prism Reverse Conical Pattern  JK-PLZB Anti Glaring Diffuser Sheet  for UGR< 19 (Jk-PLZB) Unified Glaring Rating<19 Pattern: Concave hexagon, cone bottom Material: PS Thickness:1.2mm/1.5mm/2.0/3.0mm (can be customized) Standard Size: 1200*1200mm (Can be customized) Easy to fabrication Enviroment Friendly Diffuer Sheet   Application The application is different depend on the edge -lit usage or back-lit usage, for example if it's side-lit usage, there will be four layer structure, from the top to bottom will be UGR diffuser sheet , the diffuser film and LGP and reflective film, it can be illustrated that the UGR diffuser positioned in outer layer with the texture face towards the observer; The diffusion film located in the middle layer with the micro structure facing towards the LGP; the LGP be placed between the diffusion film and the reflective film, and with the dot side facing towards the diffusion film, the smooth side towards the reflective film.

PC Diffuser Sheet   products have a light transmittance of 80% or more and ordinary PC milky whiteboards are only 20%. Through the diffusion effect of the diffuser plate, the entire board surface forms a uniform light emitting surface without forming dark areas, which will not appear on the screen. The residual image is formed to make the picture more realistic and achieve the visual effect of crystal clearness throughout the body. Baixing Plastic can customize any size and engraving of PC diffuser. PC Diffuser Sheet When light is emitted from one medium to the smooth interface of another medium, part of the light is reflected by the interface, and part of the light is refracted in the other medium through the interface. The incident angle of light is equal to the reflection angle, and the reflected light and the incident light are on both sides of the normal in the same plane. This is the law of reflection. The refracted light conforms to the law of refraction: the refracted light is

Light diffusing materials are materials that can convert point and line light sources into line and area light sources. Generally speaking, the function of such materials is to make the light source less dazzling to the naked eye after refraction, reflection and scattering. Then   Prismatic Diffuser Panel Factory   will guide everyone to understand the common light diffusion materials in LED. At present, the preparation methods of light diffusion materials mainly include polymerization method and blending modification method. 1. The polymerization method The pseudo-polymerization method is based on the principle of light refraction, and selects two polymer monomers with a certain difference in refractive index and poor compatibility to polymerize together or uses segmented polymerization to further prepare light-scattering light-diffusing materials. Two monomers with different reactivity are prepared by polymerization, because the scatterer monomer and the monomer forming the matrix ha

Diffusion plates are widely used in liquid crystal displays, LED lighting, and imaging display systems. Their main function is to diffuse the incident light sufficiently to achieve a softer and more uniform irradiation effect. The theoretical basis of   LED Lighting Diffuser Sheet   is that when light is emitted from one medium to the smooth interface of another medium, part of the light is reflected by the interface, and part of the light is refracted in the other medium through the interface. The laws of refraction and reflection are the basis of geometric optics. They not only lay the foundation for theoretical research, but also for the development of optical technology and the design of optical products. The biggest feature of the so-called diffuser plate is that it has a great interference with light. Regardless of the original design's light distribution curve, as long as the light passes through the diffuser, it will change the beam angle to 160-176 degrees. Therefore, from