跳至主要内容

PS Diffuser sheet with Prism Reverse Conical Pattern JK-PLZB

PS Diffuser sheet with Prism Reverse Conical Pattern JK-PLZB

Anti Glaring Diffuser Sheet for UGR< 19 (Jk-PLZB)

Unified Glaring Rating<19

Pattern: Concave hexagon, cone bottom

Material: PS

Thickness:1.2mm/1.5mm/2.0/3.0mm (can be customized)

Standard Size: 1200*1200mm (Can be customized)

Easy to fabrication

Enviroment Friendly

Diffuer Sheet Application

The application is different depend on the edge -lit usage or back-lit usage, for example if it's side-lit usage, there will be four layer structure, from the top to bottom will be UGR diffuser sheet, the diffuser film and LGP and reflective film, it can be illustrated that the UGR diffuser positioned in outer layer with the texture face towards the observer; The diffusion film located in the middle layer with the micro structure facing towards the LGP; the LGP be placed between the diffusion film and the reflective film, and with the dot side facing towards the diffusion film, the smooth side towards the reflective film.

评论

发表评论

此博客中的热门博文

Plastic Artist-Acrylic Processing Technology

Acrylic can be used casting, injection molding, extrusion, thermoforming, laser engraving, laser cutting and other processes. Casting molding Casting molding for forming plexiglass sheet, bar and other profiles, that is, body-bulk polymerization method of forming profiles. After casting molded products need to be post-processed, post-processing conditions are incubated at 60 ℃ 2 hours, 120 ℃ for 2 hours. Injection molding Injection molding using suspension polymerization obtained pellets, molding in the ordinary plunger or screw injection molding machine. Process parameters include screw injection molding machine, plunger injection molding machine, barrel temperature, injection molding products also need to eliminate the internal stress treatment, processing in the hot air circulation oven at 70 ~ 80 ℃, processing time as the thickness of acrylic products, the general All about 4 hours. Thermoforming Thermoforming is the process of making plexiglass sheets or she...
发表评论
阅读全文

How much do you know about PMMA Diffuser Sheet?

Background, technical characteristics, principle and application of PMMA diffuser. High Quality PMMA Diffuser Sheet , a material with light diffusing properties, is one of the types of diffuser plates of PS (polystyrene), PC (polycarbonate), PP (polypropylene), etc. The optical characteristics of plastic sheets such as haze, high light transmittance and high diffusivity can effectively convert point or line light sources into soft and uniform surface light sources. Under the premise of achieving good light transmittance, they also have good The light source lattice shielding property is an ideal optical material for solving the secondary light distribution of LED lamp products, and is the best light diffusion material for LED lighting products. PMMA Diffuser Sheet First, the PMMA diffuser produces a background In the process of LED lighting fixtures being gradually accepted by the market, the problem of LED lamp masks has been plagued by lamp manufacturers, which must have h...
发表评论
阅读全文

Development Background of LED Diffuser Sheet

Led diffuser plate  is an important part from the past to now. Glass was used as the lampshade initially, but the glass was not brittle and the diffusion effect of light was not very good. It was difficult to meet the lighting requirements. Later, it gradually developed to replace glass with resin, but if only transparent resin lampshade, although the light transmittance is high, the basic can reach more than 90%, but the light diffusion effect is not ideal, poor light concealment. The white resin, whose light transmittance is too low, seriously affects the illumination of the LED lamp. In this case, techniques such as adding milky white pigments and surface scrubbing aids are used. Although this solves the issue of light source shielding, there is an excessively low light transmittance, which seriously affects the efficacy of LED lighting. Therefore, the problem of diffusion masks has been plagued by problems. In such a contradictory problem of light rate and light source shieldin...
发表评论
阅读全文