跳至主要内容

Light Guide Plate


Light Guide Plate

Product Description

Different LGP Technology can be available

A Light Guide Plate is an acrylic or PS panel typically made from pure PMMA or PS resin. There are several ways to make these light guide plate, Printed Dot either white or black dots, laser etch or molded microlens or particulates are added into the panel itself. The purpose of all methods is to direct light out the front.

The highest uniformity and luminaire efficiency

Our Light Guide Plate is made from optical clear Mitsubishi acrylic or Optial Grating PS plate, a clear sheets of the highest quality, in which an optimized pattern is beamed or Screen Printed with the latest laser techniques, tailored to your dimensions. This innovative technology guarantees the Light Guide Plate with highest light output and a beautiful, fully evenly distributed appearance.The key is to have uniform light extraction from the bottom to top of Light Guide Plate ,so the patterns are less dense at the bottom and more dense at the top to eject the light to reach the highest uniformity and luminaire efficiency.

We can customize/design optical patterns for Light Guide Plate in a variety of shapes and sizes to get the ultimate balance of light guiding and light efficiency performance.

评论

发表评论

此博客中的热门博文

Plastic Artist-Acrylic Processing Technology

Acrylic can be used casting, injection molding, extrusion, thermoforming, laser engraving, laser cutting and other processes. Casting molding Casting molding for forming plexiglass sheet, bar and other profiles, that is, body-bulk polymerization method of forming profiles. After casting molded products need to be post-processed, post-processing conditions are incubated at 60 ℃ 2 hours, 120 ℃ for 2 hours. Injection molding Injection molding using suspension polymerization obtained pellets, molding in the ordinary plunger or screw injection molding machine. Process parameters include screw injection molding machine, plunger injection molding machine, barrel temperature, injection molding products also need to eliminate the internal stress treatment, processing in the hot air circulation oven at 70 ~ 80 ℃, processing time as the thickness of acrylic products, the general All about 4 hours. Thermoforming Thermoforming is the process of making plexiglass sheets or she...
发表评论
阅读全文

How much do you know about PMMA Diffuser Sheet?

Background, technical characteristics, principle and application of PMMA diffuser. High Quality PMMA Diffuser Sheet , a material with light diffusing properties, is one of the types of diffuser plates of PS (polystyrene), PC (polycarbonate), PP (polypropylene), etc. The optical characteristics of plastic sheets such as haze, high light transmittance and high diffusivity can effectively convert point or line light sources into soft and uniform surface light sources. Under the premise of achieving good light transmittance, they also have good The light source lattice shielding property is an ideal optical material for solving the secondary light distribution of LED lamp products, and is the best light diffusion material for LED lighting products. PMMA Diffuser Sheet First, the PMMA diffuser produces a background In the process of LED lighting fixtures being gradually accepted by the market, the problem of LED lamp masks has been plagued by lamp manufacturers, which must have h...
发表评论
阅读全文

Development Background of LED Diffuser Sheet

Led diffuser plate  is an important part from the past to now. Glass was used as the lampshade initially, but the glass was not brittle and the diffusion effect of light was not very good. It was difficult to meet the lighting requirements. Later, it gradually developed to replace glass with resin, but if only transparent resin lampshade, although the light transmittance is high, the basic can reach more than 90%, but the light diffusion effect is not ideal, poor light concealment. The white resin, whose light transmittance is too low, seriously affects the illumination of the LED lamp. In this case, techniques such as adding milky white pigments and surface scrubbing aids are used. Although this solves the issue of light source shielding, there is an excessively low light transmittance, which seriously affects the efficacy of LED lighting. Therefore, the problem of diffusion masks has been plagued by problems. In such a contradictory problem of light rate and light source shieldin...
发表评论
阅读全文